Restoring A Biedermeier Tambour Desk Part 1

CIMG2476

This Biedermeier desk came into the workshop for restoration.

The tambour needed relining, the feet were missing and there was damage to the left hand side of the plinth. There was some patching needed to the veneers and a new leather was required. The finish to the desk was badly faded and stained in places. After discussion with the client we decided what shape the missing feet should be,what kind of leather (skiver or hide) and what style of border they would like.

As you can see from the picture below it was missing its spindles and rails from the gallery.

2012-07-01 01.27.45

The handles were removed as they were added at a later date, these pieces didn’t usually have handles fitted and relied on keys to open and close them, which is why they often got damaged around the key holes.

2012-07-01 01.44.29

Relining The Tambour
As you can see from this picture, the bottom slat  was broken in the middle  and had come apart from the rest of the tambour necessitating relining.

IMGA0023

The back panel was removed and the tambour released. It was then cramped to a flat board on the bench to keep the slats square and prevent them from springing.

CIMG2473

The old canvas was removed and the surface sanded.

CIMG2482

New calico was glued in place.

CIMG2484

After 24 hours the canvas was trimmed at the edges.

Restoring A Biedermeier Tambour Desk (Part 2)

 

Advertisements

One thought on “Restoring A Biedermeier Tambour Desk Part 1

  1. Pingback: Restoring A Biedermeier Tambour Desk Part 2 | Antique Mike

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s